Description
The Intellinet Network
Solutions 8-Port Gigabit
Ethernet PoE+ Switch with 2
RJ45 Gigabit Uplink Ports
passes both data and
electrical power to a number
of PoE-compatible devices via
standard network cables.
Equipped with eight Gigabit
Ethernet ports, the switch can
power wireless LAN access
points and bridges, VoIP
phones, IP video cameras and
more while delivering network
speeds of up to 1,000 Mbps.
Power over Ethernet 802.3at
This high-powered switch
supports the IEEE 802.3at
protocol and can inject up to
32 watts of power per port*.
IEEE802.3af- or
IEEE802.3at-compliant devices
attached to the switch require
no additional power, which
eliminates the time and
expense of electrical rewiring
and minimizes the unsightly
clutter caused by power
supplies and adapters in
awkward places such as
ceilings and walls. Any mix of
PoE and non-PoE devices is
supported. Thanks to its
built-in short-circuit,
overload and high-voltage
protection functions, your
equipment is well-protected.
For devices that are not
802.3at/af compliant (e.g.,
legacy wireless access points
or network cameras), we
suggest the use of an
Intellinet Network Solutions
PoE/PoE+ Splitter.
Equipped with eight
auto-sensing 10/100/1000 Mbps
RJ45 Gigabit Ethernet ports
and two RJ45 uplink ports,
Intellinet Network Solutions
8-Port Gigabit Ethernet PoE+
Switch with 2 RJ45 Gigabit
Uplink Ports offers plenty of
performance for your
computers, servers and other
networking devices.
* Total PoE budget for this
switch is 120 watts. Per-port
average power distribution is
15 watts; maximum per-port
power usage cannot exceed 32
watts
Provides power and data
connection for up to eight PoE
network devices
Saves time and money by
delivering data and power via
existing network cables
10/100/1000 auto-sensing ports
automatically detect optimal
network speeds
IEEE 802.3at/af-compliant RJ45
PoE/PoE+ output ports
Power output up to 32 watts
per port*
Manual PoE extend mode
(reduces network speed and
extends PoE support to 250 m)
Manual VLAN mode (allows ports
1 through 8 to be isolated
from each other)
PoE power budget of 120 watts
Two RJ45 Gigabit uplink ports
Supports IEEE 802.3at and IEEE
802.3af-compliant PoE devices
(e.g., wireless access points,
VoIP phones, IP cameras)
Supports IEEE 802.3at/af
detection and short circuit,
overload and high-voltage
protection
Complies with the IEEE 802.3az
(Energy Efficient Ethernet
EEE) specification
Green Ethernet power-saving
technology deactivates unused
ports and adjusts power levels
based on the cable length
All RJ45 ports with Auto-MDIX
(auto uplink) support
Store and forward switching
architecture
IEEE 802.3x flow control for
full duplex
Supports up to 8192 MAC
address entries, Auto-Learning
and Auto-Aging
Cooling fan for ventilation
Three-year warranty